TM 5-3895-370-14&P
(n)
Loosen setscrew (23) and remove handle
(24) from extension (25).
NOTE
Step (n) only applies to one valve.
(o)
Loosen two setscrews (26) and remove
extension (25) from two-way valve (21).
(p)
Remove two male union halves (18 and
20), nuts (16 and 19), reducers (27), and
nipples (28) from two-way valve (21).
(2)
Remove bituminous piping and flange from
pump as follows:
(a)
Remove eight nuts (29), flange (30), and
elbow (31) from pump (32).
(b)
Remove and discard gasket (33) from
pump (32).
(c)
If damaged, remove elbow (31) from
flange (30).
5-205
