TM 5-3895-370-14&P
(6)
If removed, install expansion plug (4) in oil filler base.
WARNING
Adhesive
sealant,
MIL-S-46163,
can
damage
your
eyes.
Wear
safety
goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes,
flush eyes with water and get immediate medical attention.
(7)
If removed, apply sealant to outside diameter of expansion plug (3) then install in camshaft bore.
(8)
If removed, apply sealant to outside diameter of three cup plugs (2) then install. Ensure cup plugs are even with
countersink in block.
(9)
If removed, mark camshaft bushing (1) and bore to aline oil hole.
(10)
Install camshaft bushing (1).
(11)
Ensure clearance of oil hole by passing through 0.128 in. (3.251 mm) rod. If rod will not pass through hole,
remove camshaft bushing (1) and reinstall.
5-259
