TM 5-3895-370-14&P
CAUTION
Do not overheat gear. Permanent
warpage will result to gear.
(6)
Heat gear (11) in oven for 45 minutes at 250
degrees F (121 degrees C).
WARNING
Wear thermal protective gloves when
installing gear. Gear is hot and can
cause severe burns to personnel.
(7)
Install gear (11) with timing mark facing out.
WARNING
Crankshaft weighs 80 lbs (36 kg).
Attach a suitable lifting device prior
to removal to prevent possible injury
to personnel.
CAUTION
Use
caution
when
installing
crankshaft
on
connecting
rods.
Scratched or nicked rod journals may
result in damage to engine assembly.
(8)
While assistant operates suitable lifting device,
mechanic guides and installs crankshaft (1) in
engine block (10).
(9)
Remove suitable lifting device from crankshaft
(1).
5-273
