TM 5-3895-370-14&P
5-65. CRANKSHAFT REPLACEMENT/REPAIR (CONT).
CAUTION
Do
not
apply
grease
on
outer
diameter
of
bearing
halves
or
damage may result to bearing halves,
related bearing caps, and crankshaft.
(10)
Lubricate four top rod bearing halves (9) and
seven top bearing halves (4) on convex side
only with general purpose grease.
(11)
Install four top rod bearing halves (9) in four rod
caps (7).
(12)
Lubricate threads of eight screws (6) and
underside of four rod caps (7) with engine oil.
CAUTION
Rod bearing caps and connecting
rods have numbers located on one
side. Numbers must be alined and
match. Failure to do so will result in
damage
to
crankshaft
and
connecting rod assemblies.
(13)
Install four rod caps (7) on four connecting rods (8) with eight screws (6). Do not tighten screws.
(14)
If removed, install 10 ring dowels (5) in five bearing caps (3).
CAUTION
Do not apply grease on outer diameter of bearing halves or damage may result to
bearing halves, related bearing caps, and crankshaft.
(15)
Lubricate five top bearing halves (4) with general purpose grease.
(16)
Lubricate 10 screws (2) and five bearing caps (3) with engine oil.
CAUTION
Bearing caps have numbers located on top near ring dowels. Numbers must face
oil cooler side of engine beginning with number 1 at front of engine (fan side).
Failure to properly install could cause damage to engine.
(17)
Install five bearing caps (3) with 10 screws (2).
5-274
