TM 5-5430-211-13 & P
TABLE 3-2
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES-CONTINUED
M-Monthly
S-Semi Annually
ITEM
INTERVAL
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
NO
M
S
PROCEDURE
READY/AVAILABLE IF:
NOTE
The following inspections and procedures can
only be performed when the tank has been taken
out of service and drained.
17
Drain Assembly. Visually inspect for leakages.
Tighten bolts to 100 inch lbs.
Class III leakages present.
18
Check join between Drain Assembly and hose for
tightness and evidence of leaks.
Class III leakage present.
19
Repair hole in ground and/or sand bedding to hold
Drain Assembly and drain hose.
20
Check drain hose for damage, cracks and leaks.
Hose not in good repair.
SECTION V ORGANIZATIONAL TROUBLESHOOTING
3-5
TROUBLESHOOTING
The water tank and its assemblies are simple systems.
They are therefore trouble free except for:-
Water leaks from fitting assemblies
Water leaks from tank body
See Section IV for definition of leaks.
3-12