TM 5-5430-211-13 & P
3-13
VENT ASSEMBLY-CONTINUED
ITEM
ACTION
REMARKS
INSPECTION-CONTINUED
7.
Washers
Examine for damage
Replace if damaged.
8.
Dust Cap
Examine for damage
Replace if damaged.
Examine gasket
Replace if damaged.
CLEANING
All items except
If any item is particularly dirty
ALL ITEMS WHICH
bolts and washers.
wash with soap and water.
COME INTO CONTACT
Rinse all items in clean water.
WITH THE DRINKING
WATER MUST BE
CLEAN.
INSTALLATION
1.
'O' Ring Gasket
Smear the new gasket with a
The petroleum jelly helps
THIN film of petroleum jelly.
the gasket to bed down
Place it in the groove of the
evenly.
compression ring.
2.
Coupling half,
Align the holes in the coupling
The epoxy-polyamide
quick disconnect,
half with the holes in the
primer prevents electrolytic
male flanged, and
compression ring of the tank.
corrosion.
dust cap.
Coat the bolts and washers with
a thin film of epoxy-polyamide
primer coating.
3-25
