Section II.
NORMAL OPERATING PROCEDURES
3-3.
FILLING TANK.
Do not drop sharp objects on the tank. Walk on tank as little as
possible.
When walking on the tank, wear soft-soled shoes. Do not
drive vehicles over tank.
Failure to observe these precautions may
result in punctures, tears, or scuffs on the tank body.
Do not drop or strike tank fittings or accessories. All metal items
are aluminum and bend easily.
a.
Check to see that tank is properly deployed. It should be lying flat
and smooth.
b.
Check that the drain hose is attached and the drain gate valve is
closed.
c.
Check that vent assembly is operational.
d.
Check filler/discharge elbow that will not be used in filling. Make
sure it is covered by a dust cap or plug.
e.
Attach water source line to filler/discharge gate valve to be used
for filling.
f.
Open gate valve.
Do not overfill the tank.
Overfilling the tank may result in rupture or
leakage.
The required quantity of water can be measured by using range
poles.
3-2
