TV8. 510 (M) Engines
DAILY
Check coolant level (see warning on page 54).
Check engine lub oil level (see page 56).
Check gearbox fluid or lub oil level (see pages 59 and 61).
Check oil pressure (if equipped with gauge).
FIRST 25/50 HOURS
Change engine lub oil (see page 58).
Renew engine lub oil filter elements (see page 57).
Set valve clearances to 0.012 in (0.30 mm) cold (see page 61).
Check coolant level (header tank) and inspect for coolant leaks.
Check external nuts, setscrews, mountings, etc., for tightness.
Check drive belt tension (see page 56).
Check electrical equipment and connections.
Check for lub and fuel oil leaks.
Check engine idling speed (see page 50).
Check general performance of engine.
EVERY 100 HOURS OR 2 MONTHS (WHICHEVER OCCURS FIRST)
Clean air intake filter.
Change engine lub oil if using API "CC" oil (see page 58).
EVERY 200 HOURS OR 4 MONTHS (WHICHEVER OCCURS FIRST)
Change engine lub oil if using API "CD" oil (see page 58).
Renew engine lub oil filter elements (see page 57).
Check drive belt tension (see page 56).
Service injectors (see page 53).
Clean water trap (if equipped).
Check engine for leakage of oil and water.
EVERY 400 HOURS OR 12 MONTHS (WHICHEVER OCCURS FIRST)
Renew final fuel filter elements (see page 49).
Check and adjust valve tip clearances (see page 61).
Check hoses and clamps.
Drain and clean fuel tanks.
Change gearbox fluid (Borg-Warner), (see page 59).
Check gearbox oil/fluid cooler for water flow restrictions (see page 55).
Clean fuel lift pump strainer.
EVERY 800 HOURS
Clean turbocharger impeller, diffuser and oil drain pipe.
Check sea water pump impeller (see page 54).
Change gearbox lub oil (Twin Disc MG-502 and MG-506) (see page 59).
EVERY 2,400 HOURS
Arrange for examination and service of accessory equipment (i.e., starter motor,
alternator, etc.). See page 62 for Air Charge Cooler servicing.
-39-
