TECHNICAL DATA-B.10 Water Pump (Fresh Water) Type ...... ...... ...... ...... ...... Centrifugal Outside Dia.  of Shaft for Pulley  ...... ...... ...... 0.7492/0.7497 in (13,03/13,04 mm) Inside Dia.  of Pulley Bore ...... ...... ...... 0.7508/0.7516 in (19,07/19,09 mm) Transition Fit of Pulley on Shaft   ...... ...... ...... 0.0011/0.0024 in (0,03/0,06 mm) Outside Dia.  of Shaft for Impeller..... ...... ...... 0.6262/0.6267 in (15,90/15,92 mm) Inside Dia.  of Impeller Bore ...... ...... ...... 0.6249/0.6257 in (15,87/15,89 mm) Interference Fit of Impeller on Shaft ...... ...... 0.0005/0.0018 in (0,01/0,05 mm) Outside Dia.  of Impeller ...... ...... ...... 3.094/3.096 in (78,58/78,63 mm) Impeller Blade to Body Clearance ...... ...... 0.027/0.035 in (0,68/0,89 mm) Water Pump Seal Type ...... ...... ...... Synthetic Rubber, Carbon Faced Outside Dia.  of Water Pump Seal for Pump Bore   .... 1.435/1.436 in (36,45/36,47 mm) Inside Dia.  of Seal for Impeller Shaft ...... ...... To suit 0.625 in (15,875 mm) Dia.  shaft Bearing Seal Type ...... ...... ...... ...... Felt, impregnated with Water Repellent Oil Bearing Seal Thickness  ...... ...... ...... ...... 0.219 in (5,56 mm) Outside Dia.  of Seal ...... ...... ...... ...... 1.375 in (34,93 mm) Inside Dia.  of Seal ...... ...... ...... ...... 0.922 in (23,41 mm) Water Pump (Sea Water) Type ...... ...... ...... ...... ...... Centrifugal FUEL SYSTEM Fuel Oil Specifications United Kingdom BS.2869:1967 Class A.  or A.2 United States V-F-800a Grades DF-A, DF-1 or DF-2. A.S.T.M./D975-66T Nos.  1-D or 2-D France J.O.  14/9/57 Gas Oil or Fuel Domestique India IS: 1460/1968 Grade Special or Grade A Germany DIN-51601 (1967) - Italy CUNA-Gas Oil NC - 630-01 (1957) Sweden SIS.  15 54 32 (1969) - Switzerland Federal Military Spec. - 9140-335-1404 (1965) Fuel oils available in territories other than those listed above which are to an equivalent specification may be used. Fuel Lift Pump Type of Pump ...... ...... ...... ...... A.C.  Delco V.P.  Series Method of Drive ...... ...... ...... ...... Eccentric on Camshaft Delivery Pressure ..... ...... ...... ...... 2 ^3/4 to 4¼ lbf/in² (0.19/0,30 kgf/cm²) - 19/29 ...... ...... ...... ...... kN/m²: Pump to Cylinder Block Gasket Thickness ...... 0.025 in (0,64 mm) Spring Colour Code ...... ...... ...... ...... Green Fuel Filter (Final) Element Type ...... ...... ...... ...... Paper Valve Type ...... ...... ...... ...... ...... Gravity Vent Valve