WHEEL CYLINDER REPLACEMENT

MASTER CYLINDER REPLACEMENT (Cont). - TM-9-2330-267-14P_109

WHEEL CYLINDER REPLACEMENT (Cont

TM-9-2330-267-14P Truck Utility; S250 Shelter Carrier 4x4 M1113 (2320-01-412-0143) (EIC:B6B) Manual
Page Navigation
101

TM 9-2330-267-14&P 4-34. WHEEL CYLINDER REPLACEMENT. This Task Covers: a. Removal b. Installation Initial Setup: Equipment Conditions: Materials/Parts: ‘ Service brakes disassembled (para 4-32). l Rags (Item 18, Appendix E) Tools/Test Equipment: s Two Iockwashers l General mechanic’s tool kit l Drain pan NOTE Top and bottom wheel cylinders are replaced the same way. Top wheel cylinder is shown. a. REMOVAL 1. 2. 3. Remove bolt (10), flatwasher (7), spacer (9), and hydraulic line (8) from backing plate (4) and wheel cylinder (1). Remove two screws (6), Iockwashers (5), shield (3), and wheel cylinder (1) from backing plate (4). Discard Iockwashers. Remove bleeder valve (2) from wheel cylinder (1). b. INSTALLATION 1. Install bleeder valve (2) in wheel cylinder (1). 2. Position shield (3) and wheel cylinder (1) on backing plate (4) and install two screws (6) and new Iockwashers (5). 3. Install spacer (9), flatwasher (7), bolt (10), and hydraulic line (8) on backing plate (4) and wheel cylinder (1). TA507028 4-60

Privacy Statement
Press Release
Contact