BLEEDING HYDRAULIC BRAKE SYSTEM (cont)

AIR LINES, HOSES, AND FITTINGS MAINTENANCE (M149)

TM-9-2330-267-14P Truck Utility; S250 Shelter Carrier 4x4 M1113 (2320-01-412-0143) (EIC:B6B) Manual
Page Navigation
106

TM 9-2330-267-14&P 4-36. BLEEDING HYDRAULIC BRAKE SYSTEM (Con’t). 6 Remove filler plug (5) and vent tube assembly (6) from master cylinder (4). 7. Refill master cylinder (4) and repeat steps 4 and 5 until no air bubbles appear and fluid stream is clear. 8. Repeat steps 1 through 7 on opposite wheel. b. PRESSURE FEED FILLER BLEEDING 1. Remove filler plug (5) and vent tube assembly (6) from master cylinder (4). Install pressure feed adapter. NOTE Filler should contain 10-20 psi (69-138 kPa) air pressure and sufficient fluid to maintain constant level In master cylinder. 2. Bleed system as in manual bleeding except for manual filling of master cylinder and manual operation of brake pedal are not required. 3. Remove pressure feed filler hose and pressure feed adapter from master cylinder (4). 4. Install filler plug (5) and vent tube assembly (6) in master cylinder (4). FOLLOW-ON TASKS: . Service master cylinder (para 4-33). TA507031 4-65

Privacy Statement
Press Release
Contact