TM 9-2330-267-14&P
4-47. FENDER ASSEMBLY REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
l Sixteen Iockwashers
l General mechanic’s tool kit
NOTE
Right and left fenders and fender supports are replaced the same way. This procedure
covers one side.
a.
REMOVAL
NOTE
The M149 has no splashguard. If working on an M149, skip step 1.
1.
Remove four nuts (12), Iockwashers (11), screws (4), retainer (13), and splashguard (7) from fender support (2).
Discard Iockwashers.
2.
Remove six screws (8), flatwashers (9), Iockwashers (5), nuts (6), and fender (10) from fender supports
(2 and 16). Discard Iockwashers.
NOTE
The M149 has Iockwashers located between screws (3) and fender supports
(2 and 16).
3.
Remove six screws (3), Iockwashers (14), nuts (15), and fender supports (2 and 16) from frame assembly (1).
4-86
