FAUCET BOX ASSEMBLY MAINTENANCE

FENDER ASSEMBLY REPLACEMENT (Cont)

FAUCET BOX ASSEMBLY MAINTENANCE (cont)

TM-9-2330-267-14P Truck Utility; S250 Shelter Carrier 4x4 M1113 (2320-01-412-0143) (EIC:B6B) Manual
Page Navigation
129

TM 9-2330-267-14&P 4-48. FAUCET BOX ASSEMBLY MAINTENANCE. This Task Covers: a. Removal c. Assembly b. Disassembly d. Installation Initial Setup: Equipment Conditions: Materials/Parts: l Piping and faucets removed (para 4-58). l Fourteen Iockwashers Tools/Test Equipment: Q General mechanic’s tool kit a. REMOVAL 1. Remove four nuts (4), Iockwashers (3), and bolts (2) from faucet box assembly (1). Discard lock- washers. 2. Remove faucet box assembly (1) from frame assembly. b. DISASSEMBLY 1. Release fastener (14) from bracket (11). 2. Remove three screws (5), Iockwashers (1 8), nuts (1 7), and access cover (10) with hinge (6) from box (7). Discard Iockwashers. 3. Remove three screws (5), Iockwashers (18), nuts (17), and hinge (6) from access cover (10). Discard Iockwashers. 4. Remove two nuts (8), Iockwashers (9), screws (12), and bracket (11) from access cover (10). 5. Remove two screws (13), Iockwashers (15), nuts (16), and fastener (14) from box (7). Discard Iockwashers. TA507049 4-88

Privacy Statement
Press Release
Contact