TM 9-2330-267-14&P
4 - 2 4 . C O M P O S I T E S T O P L I G H T - T A I L L I G H T M A I N T E N A N C E ( M 1 4 9 A 1 A N D M 1 4 9 A 2 )
(Con’t).
b .
DISASSEMBLY
1.
Loosen six screws (10) and remove lens (9) from body assembly (7).
2.
Remove preformed packing (8) from lens (9). Inspect preformed packing for damage. If damaged, discard and
replace.
3.
Replace lamps as required (para 4-21).
c.
ASSEMBLY
1.
Install new lamps as required (para 4-21).
2.
Install preformed packing (8) in lens (9).
3.
Position lens (9) on body assembly (7) and tighten six screws (10).
d.
INSTALLATION
1.
Position body assembly (7) on bracket (3) and install two new Iockwashers (2) and screws (1)
2.
Install four plug connectors (5) and grommet (4) in hole on frame assembly.
3.
Connect four plug connectors (5) to chassis wiring harness.
4.
Install four plug connectors (5) in clip assembly (6).
TA507007
4-34
