TM 9-2330-267-14&P4-25. CHASSIS WIRING HARNESS REPLACEMENT.This Task Covers:a. Testc.Installationb. RemovalInitial Setup:Equipment Conditions:Materials/Parts:l Intervehicular cable disconnected from towingl Marker tags (as required) (Item 25, Appendix E)vehicle (para 2-12).l Ten IockwashersTools/Test Equipment:Q General mechanic’s tool kitl Multi meterNOTETesting the chassis wiring harness consists of a continuity check of the individual wirescontained in the harness assembly. Refer to paragraph 4-28 for wire function andidentification. Before disconnecting any wires, ensure that identification bands arepresent.1.Remove six front plug connectors (1) from clip assembly (3) and disconnect front plug connectorsintervehicular cable (2).2.Remove rear plug connectors (5) from right and left rear clip assemblies (4).3.Disconnect rear plug connectors (5) from right and left light assemblies (6).from4.Place red lead from multimeter in one of six front plug connectors (1) and place black lead in corresponding rearplug connector (5). Check for continuity.5.Repeat step 4 for all front plug connectors (1) and rear plug connectors (5).TA5070094-36
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
