TM 10 5430-240-13&P 0020 00
0020 00-2
INSTALLATION
1. Install the new hand grip (3) on top of tank (5) and align the three holes in the tank (5).
2. Assemble one bottom clamp (4) at a time by inserting cap screw (1) through flat washer (2) and the
hole in hand grip (3), then thread it into bottom clamp (4). Hand-tighten only.
3. Repeat step 2 to install the other two bottom clamps (4).
4. Torque the three cap screws (1) to 70.0 ± 5.0 ft-lbs (95 } 7 Nm).
END OF WORK PACKAGE