TM 5-3825-226-24
TORQUE CONVERTER
20.
Put stator (19) in position in the turbine.
Install the six bolts and two locks that hold
it. Tighten the bolts to a torque of 20 -± 1
Ib.ft. (25 ± 1 N.m).
21.
Install ring (20) with tool (D).
22.
Put turbine (21) in position on the shaft as
shown.
23.
Heat inner race (22) to a temperature of
275°F (135°C) and install it on the shaft
as shown.
3-170