TM 5-3825-226-24
TRANSMISSION
26.
Turn housing (55) and planetary carrier (47) over
and install ring (59) to hold the planetary carrier in
position.
27.
Install the No. 4 planetary carrier (45) in clutch
housing (55).
28.
Turn clutch housing (55) and the No. 4 planetary
carrier over and install the plate and bolt (61) to
hold the carrier in position. Make sure the boss in
the plate is engaged with the hole in the No. 4
planetary carrier. Tighten bolt (61) to a torque of
34 ± 2 lb.ft. (45 ± 3 N.m).
29.
Install ring (60) in No. 3 carrier (47).
30.
Install tooling (A) to hold the No. 4 piston in
position in clutch housing (55).
31.
Install two 1/2"-13 NC forged eyebolts in clutch
housing (55) and fasten a hoist to it.
32.
Put clutch housing (55) in position on the
transmission. Make sure the springs are correctly
engaged in the No. 4 piston.
33.
Remove the eyebolts and tooling (A).
34.
Make sure No. 3 piston (63) is in position in clutch
housing (55) and install ring gear (62).
3-208