Connect hose assembly (3) to angle assembly
(2) under the hitch and the tank.
Connect two hose assemblies (4) to the back of
Make sure the O-ring seal is in position in tube
assembly (5) and install the two bolts (6) and
washers to hold tube assembly (5) to the tank.
Remove the two eyebolts from the top of the
tank and install two bolts (7), the washers and
lockwashers that hold the filter group in position.
Install the eight bolts (8), the washers and nuts
that hold the fender and tank together.
Put the air cleaner and panel assembly (9) in
position on the machine.