TM 5-3825-226-24
CAB
3.
Fasten jack (4) to the right rear of the cab with
pin (3) and clip. Remove the hoist and tilt the
cab.
4.
Connect battery cable (5) to the back of the
disconnect switch. Install the cover that is
protection for the battery cable.
5.
Connect governor cable (6) at the bracket and
lever. Check the travel of the accelerator pedal
in the cab, and linkage at the governor to make
sure the adjustment is correct.
6.
Connect torque converter temperature sensing
unit (7) to the converter.
7.
Connect hose (8) to the air cleaner.
3-328