TM 10-3835-223-13&P
2-7. OPERATING PROCEDURES - cont.
(4)
Connect slave cable (power cable) from power pack to 24Vdc vehicle power source.
Use the
supplied cable adapter, if required.
NOTE
All references to LEFT, RIGHT, CW (clockwise) or CCW (counterclockwise)
are from the power pack side, facing the unit.
(5)
(6)
(7)
(8)
Determine which hose reel you want to wind.
Release brake lever.
Rotate hose reel so that cutout in spool is facing out.
Set control cable switches as follows:
(a)
Set REEL switch to LEFT or RIGHT, as required.
(b)
Set SPEED switch to SLOW.
NOTE
Hose must be wound so that hose wraps over top of hose reel spool.
(c)
If left hose reel will be wound, set REEL CCW/CW switch to CW.
If right hose reel
will be wound, set REEL CCW/CW switch to CCW.
2-19
