TM 10-3835-223-13&P
Section III. SERVICE UPON RECEIPT
Page
Unpacking Equipment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4
Checking Unpacked Equipment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4
4-4. UNPACKING EQUIPMENT.
WARNING
The hose reel system weighs 4,820 pounds and is design to be moved by forklift
or hoist only. The removable power pack weighs 172 pounds and requires four
personnel to transport.
NOTE
Each hose reel system consists of six frame units and one power pack. The
power pack is interchangeable with all six frame units. When unpacking,
locate the frame unit containing the power pack.
a.
Open ISO container.
b.
Loosen turnbuckles securing hose reel.
c.
Remove hose reel from container using rough terrain forklift or similar type equipment.
d.
Remove hose couplings from container.
e.
Remove protective wrapping from all frame units.
f.
Remove tape, cardboard, protective paper, and plugs from frame unit and power pack.
4-5. CHECKING UNPACKED EQUIPMENT.
a.
Inspect equipment for damage incurred during shipment. If equipment has been damaged,
report on SF 364, Report of Discrepancy (ROD). Reject equipment if parts are missing, deformed, or
show obvious physical damage, rust or corrosion.
b.
Check equipment against packing slip to verify shipment is complete. Report all discrepancies in
accordance with instructions of DA PAM 738-750. See that special tools, components of end item and
basic issue items are with equipment.
c.
Check to see ifequipment has been modified. Refer to DA PAM 25-30.
d.
Inspect nameplates and labels. Markings must readable.
4-4
