TM 10-4130-237-14
5-24.
THERMOSTATIC VALVE REPLACEMENT (CONT)
Polyurethane foam is flammable. Burning foam causes toxic fumes. When
soldering, be very careful not to ignite foam.
3
Solder as needed to install fittings on tubing.
4
Fill in open areas with polyurethane foam.
5
Install bottom plate. Install 16 bottom plate mounting screws.
6
Set water chiller on skid base.
7
Add oil (para 3-1).
5-25.
THERMOSTATIC VALVE REPAIR
This task covers:
a. Disassembly
INITIAL SETUP
Equipment
Condition
Para
Condition Description
5-2
Engine stopped, power
disconnected, fuel line
disconnected, muffler
and housing removed.
5-24
Thermostatic valve
removed.
b. Assembly
Tools
Master Mechanics Tool Kit,
item 4, appendix B
Materials/Parts
Grease, item 9, appendix E
NOTE
Repair of the thermostatic valve consists of replacement of defective parts.
During disassembly of valve inspect parts for wear and damage. Replace
worn or damaged parts.
5-79