TM 10-4130-237-14
4-12.
TOGGLE SWITCH S3 REPLACEMENT(CONT)
b. Removal
1 Tag and remove eight wires from back of switch.
2 Remove mounting nut and flatwasher.
3 Remove switch from mounting bracket.
c.
Installation
1 Install switch in mounting bracket.
2 Install flatwasher and mounting nut.
3 Install eight wires on back of switch. Remove tags.
4-13.
WATER PUMP DRIVEBELT REPLACEMENT
This task covers:
a. Removal
b. Installation and Adjustment
INITIAL SETUP
Tools
Equipment
Condition
Para
Condition Description
4-8
Engine stopped, power
disconnected, fuel line
disconnected, muffler and
housing removed.
Tools
General Mechanic’s Tool Kit,
item 1, appendix B
4-22
