TM 10-4130-237-14
4-13.
WATER PUMP DRIVEBELT REPLACEMENT (CONT)
a. Removal
1 Loosen two mounting nuts.
2 Lift water pump, sliding mounting bolts up in holes.
3 Remove drivebelt from water pump pulley and pulley drive. Lift over fan to remove.
b. Installation and Adjustment
1 Install drivebelt on pulley drive and water pump pulley.
2 Push down on water pump, sliding bolts down in holes.
3 Adjust drivebelt to proper tension, about l/4-inch (2/3-centimeter) deflection at center of belt.
4 Tighten mounting nuts.
4-23
