TM 10-4130-237-14
4-16.
PULLEY DRIVE REPLACEMENT/REPAIR. (Applicable to Models LCW 2685 only).
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP
Equipment
Condition
Para
Condition Description
4-8
Engine stopped, power
disconnected, fuel line
disconnected, muffler and
housing removed.
4-19
4-15
Engine removed.
Fan assembly removed.
Tools
General Mechanic’s Tool Kit,
item 1, appendix B
NOTE
During disassembly of the pulley drive, inspect parts for wear and damage.
Repair of the pulley drive consists of replacement of defective parts.
a. Disassembly
1 Remove water pump drive hub assembly.
2 Unscrew threaded studbolt from end of engine driveshaft.
3 Remove two socket-head screws from compressor drive hub.
4-27
