TM 10 4320-303-13
3.4.1 6 Inch Hose Assembly Repair. (Continued)
Figure 3-1. Hose Clamp Installation.
b. Tighten hose clamps (1) until hose (2) is pinched closed.
Figure 3-2. Damaged Hose Section Removal.
NOTE
Always mark, score, and cut hose squarely. Do not leave ragged or uneven edges.
c. Cut both sides of hose (Figure 3-2, 1), 6 inches from leak.
d. Remove damaged section of hose (2).
e. Inspect inside of hose ends (3) for further damage.
f. Cut hose (1) back again, as required, to reach an undamaged area.
3-6
