TM 10-4320-303-13
3.4.1 6 Inch Hose Assembly Repair. (Continued)
Figure 3-10. Spacing of Buckles on Repaired 6-Inch Hose Assembly.
CAUTION
To avoid leaks at adaptor shoulder, buckles must use alternately positioned as
shown in figure 3-10.
v. Repeating steps i through u, install second, third and fourth strapping and buckle in an offset as shown in
figure (3-10).
w. Repeat step h and install male quick-disconnect coupling half (1) on second hose end.
Figure 3-11. Repaired Hose Connection.
x. Refer to paragraph 2.3.3.1 and connect hose ends (Figure 3-11, 1) with grooved-end pipe quick disconnect
coupling clamp (2).
y. Release hose clamps (Figure 3-1, 1) and inspect repaired section for leaks.
3-11
