TM 10-4320-303-13 4.4.3  Checking Unpacked Equipment.  (Continued) pumping assemblies.  Check the equipment against the packing slip to see if the shipment is complete.  Report all  discrepancies,  missing  components,  or  damage  in  accordance  with  the  instructions  of  DA  Pam  738-750. Report any deficiencies found while unpacking on SF 364, Report of Deficiency. Table 4-1.  Pumping Station Crate. Qty Size Item Inspection 18 6 inch Butterfly valve Check    gear-actuated    handle    for    smooth operation.  Ensure disc operates freely. 6 6 inch Check valve Ensure  assembly  is  tight.    Check  for  loose, missing, or damaged nuts. 6 6 inch x 10 Discharge hose Inspect hose for punctures, cuts, or foot assembly scrapes.  Ensure bands that secure adapters are tight. 6 6 inch x 20 Discharge hose Inspect hose for punctures, cuts, or foot assembly scrapes.  Ensure bands that secure adapters are tight. 6 6 inch x 75 Discharge hose Inspect hose for punctures, cuts, or foot assembly scrapes.  Ensure bands that secure adapters are tight. 66 6 inch Grooved pipe Check for damaged or missing gasket. coupling Check for damaged or missing components. 12 6 inch Lateral grooved Check for damaged to sealing surfaces. pipe fitting 6 6 inch Pressure relief Check for cracked or broken components. valve and nipple Make sure relief valve is firmly seated in nipple. Table 4-2.  Storage Assembly Crate. Qty Size Item Inspection 32 0.375 16 UNC- Bolt Check for worn, stripped, or damaged 2A x 3.25 threads. inch 2 4 inch Coupling half, Make sure cam arms move freely.  Check female, quick- for damaged or missing gasket.  Check disconnect for damaged threads. 2 4 inch Coupling half, Check for stripped or worn threads. male, quick- Check for damaged sealing surfaces. disconnect 2 4 inch Coupling pipe Check for stripped or worn threads. fitting 8 4 inch x 10 Discharge hose Inspect hose for punctures, cuts, or foot assembly, quick- scrapes.  Make sure cam arms move disconnect freely.  Check for damaged threads. 2 4 inch Flange adapter Check for damage to sealing surfaces. 4-4