TM 10-4320-303-13 4.4.3  Checking Unpacked Equipment.  (Continued) Table 4-4.  10-Mile Segment Crate.  (Continued) Qty Size Item Inspection NOTE Some suspension kits may contain a round stake. 5 Suspension kit Inspect kit chest for broken handles, latches, and hinges.  Open chest and check inner partitions for broken seam welds.  Check contents in each kit (listed in appendix C) for damaged or missing items. 65 6 inch Swivel joint and Check for smooth swivel operation. coupling Check for damaged or missing gasket. Check for damaged or missing components. 1 6 inch x 4 Y-connection Inspect reducer assembly for missing inch x 4 inch reducer parts.  Ensure coupling pipe fitting is tightly screwed into male quick- disconnect coupling half.  Inspect grooved pipe coupling for tightness. Ensure female quick-disconnect couplings are tightly screwed onto reducer pipe fittings.  Ensure cam arms move freely.  Check for damaged or missing gaskets on quick-disconnect and grooved pipe couplings. Table 4-5.  Hose Assembly, 6 Inch, 500 Feet Crates. Qty Size Item Inspection 132 Flaking box Inspect all accessible frame seam welds for cracks or separated metal.  Inspect four lifting clevises for cracks or distortions.  Inspect four clevis attach brackets for cracked holes and cracked or separated seam welds. Inspect tailgate assembly for cracks, breaks, holes, or any other defects. 132 6 inch x 500 Hose assembly, Inspect hose for punctures, cuts, or foot collapsible scrapes.  Ensure bands that secure adapters are tight. 4.4.4  Deprocessing Unpacked Equipment. a.  Remove all tape and packing film, if any, from equipment. b.  Remove all plastic tie-wraps, if any, necessary to place the equipment in operation. c.  Remove all shipping tags from components and retain for future reference. d.  Refer to DA Form 2258, Depreservation Guide for Vehicles and Equipment, packed with the equipment. The depreservation guide explains what was done to the 4-8