TWDS SUPPLY CONNECTION ITEMS MAINTENANCE

SECTION V. UNIT MAINTENANCE PROCEDURES - TM-10-4320-303-13_170

TWDS SUPPLY CONNECTION ITEMS MAINTENANCE - cont

TM-10-4320-303-13 Tactical Water Distribution Equipment System (TDWS) Set 10-Mile Segement Model 06749-0813-81 110-00-0000 919 and 10 Manual
Page Navigation
159

TM 10-4320-303-13 4.10.1 Reducer Y-Connection Maintenance. (Continued) b. Open cam arms on 6 inch x 10 foot suction hose assembly (2) and remove reducer Y-connection (1) from 6 inch x 10 foot suction hose assembly (2). 4.10.1.2 Disassembly. Figure 4-2. Reducer Y-Connection Disassembly. a. Remove quick-disconnect male coupling half (Figure 4-2, 1) from grooved pipe coupling fitting (2). b. Remove two female quick-disconnect couplings (3) from reducer pipe fittings (4). Discard gaskets of female quick-disconnect couplings (3). c. Remove three grooved-end pipe quick disconnect coupling clamps (5) (paragraph 2.3.3.1). d. Remove two reducer pipe fittings (4) from Y-fitting (6). e. Remove Y-fitting (6) from grooved pipe coupling fitting (2). 4.10.1.3 Inspection. a. Inspect grooved-end pipe quick disconnect coupling clamps (6) for cracks, bends, damage, or ripped, torn, sliced, or damaged gasket. b. Inspect two female quick-disconnect couplings (3) for cracks, holes, broken or missing cam arms, or damage. c. Inspect quick-disconnect male coupling half (1), grooved pipe coupling fitting (2), two reducer pipe fittings (4), and Y-fitting (6) for corrosion, cracks, holes, or damage. 4-14

Privacy Statement
Press Release
Contact