TM 10-4610-234-13
4.15 TEE ASSEMBLY MAINTENANCE.
NOTE
The following instructions apply to tee assemblies having two female cou-
plings and one male coupling (FxFxM). Maintenance of other tee assem-
blies is similar.
This task consists of:
a. Removal
e. Repair
b. Disassembly
f. Assembly
c. Cleaning
g. Installation
d. Inspection
INITIAL SET-UP:
Tools:
Tool Kit, General Mechanics, Automotive (Appendix B, Sec. Ill, item 1)
Materials/Parts Required:
Detergent, General Purpose (Item 1, Appendix D)
Rag, Wiping (Item 2, Appendix D)
NOTE
Determine additional materials required by using the following table.
Tee Assembly
Coupling Gasket
Flange Gasket
FxFxM
MS27030-9 (2)
13220E1069-1 (3)
FxMxM
MS27030-9 (1)
13220E1069-1 (3)
FxMxF
MS27030-9 (2)
13220E1069-1 (3)
MxMxF
MS27030-9 (1)
13220E1069-1 (3)
a. Removal. Disconnect tee assembly from water system (refer to para 2.10 to disconnect couplings).
b. Disassembly.
(1) Remove eight nuts (7), Iockwashers (6), flat washers (5 and 2), and bolts (1).
(2) Separate male coupling (3) and gasket (4) from tee (8).
(3) Remove eight nuts (24), Iockwashers (23), flat washers (22 and 21), and bolts (20).
(4) Separate male coupling (19) and gasket (18) from tee (8).
(5) Remove eight nuts (9), Iockwashers (10), flat washers (11 and 15), and bolts (16).
(6) Separate female coupling (14) and gasket (12) from tee (8).
(7) Remove gasket (17) from female coupling (14).
4-18.4 Change 2
