TM 10-4610-243-13
4-25.1. TEE AND GATE VALVE ASSEMBLY (9133-Y1) REPAIR - cont.
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
c.
Inspection.
(1)
Inspect male couplings (6 and 33) for cracks.
(2)
Inspect female coupling (23) for cracks and damaged lock arms.
(3)
Inspect tee (35) for cracks or corrosion.
d.
Repair.
(1)
Refer to para. 4-31a (9) to repair gate valve.
(2)
Replace defective components. Do not reuse sealing components.
e.
Assembly. Refer to figure 4-18.2.
(1)
Position gasket (34) and male coupling (33) on tee (35).
(2)
Install eight flat washers (32), screws (31), flat washers (30), lockwashers (29) and nuts (28).
NOTE
Ensure gasket is fully seated in groove of cap.
(3)
Install gasket (27) in cap (26). Connect cap to male coupling (33) with ring (25).
(4)
Position gasket (24) and female coupling (23) on tee (35).
(5)
Install eight flat washers (22), screws (21), flat washers (20), lockwashers (19) and nuts (18).
NOTE
Ensure gasket is fully seated in groove of coupling.
(6)
Install gasket (17) in female coupling (23).
4-68.2
Change 1
