TM 10-4610-243-13
4-27. TEE ASSEMBLY (9112-Y1) REPAIR - cont.
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
c.
Inspection.
(1)
Inspect male coupling (14) for cracks.
(2)
Inspect female couplings (7 and 22) for cracks and damaged lock arms.
(3)
Inspect tee (24) for cracks and corrosion,
d.
Repair. Replace defective components. Do not reuse sealing components.
e.
Assembly. Refer to figure 4-20.
(1)
Position gasket (23) and female coupling (22) on tee (24).
(2)
Install eight flat washers (21), screws (20), flat washers (19) lockwashers (18) and nuts (17)
NOTE
Ensure gasket is fully seated in groove of coupling.
(3)
Install gasket (16) in female coupling (22).
(4)
Position gasket (15) and male coupling (14) on tee (24).
(5)
Install eight flat washers (13), screws (12), flat washers (11), lockwashers (10) and nuts (9).
(6)
Position gasket (8) and female coupling (7) on tee (24).
(7)
Install eight flat washers (6), screws (5), flat washers (4) lockwashers (3) and nuts (2).
NOTE
Ensure gasket is fully seated in groove of coupling.
(8)
Install gasket (1) in female coupling (7).
(9)
Install tee assembly in water system (para 3-4a).
(10)
Startup water system (para 2-12c) and check tee assembly for leaks.
4-70
