TM 10-4610-243-13
4-27. TEE ASSEMBLY (9112-Y1) REPAIR - cont.
INITIAL SET-UP :
Tools:
Wiping Rag (Item 2, App E)
General Mechanics Tool Kit (Item 1, App. B)
Tape, Anti-seize (Item 3, App E)
Equipment Condition:
Gasket (2) (Item 4, App I)
Tee assembly removed (para 3-4a)
Gasket (3) (Item 10, App I)
Material/Parts: Lockwasher (24) (Item 11, App I)
Lockwasher (24) (Item11, App I)
Detergent, General Purpose (Item 1, App E)
NOTE
Ensure that all parts identified as mandatory replacement parts are discarded and
replaced with new components.
a.
Disassembly. Refer to figure 4-19.
(1)
Remove gasket (1) from female coupling (7).
(2)
Remove eight nuts (2), lockwashers (3), flat washers (4) screws (5) and flat washers (6).
(3)
Separate female coupling (7) and gasket (8) from tee (24).
(4)
Remove eight nuts (9), lockwashers (10), flat washers (11), screws (12) and flat washers (13).
(5)
Separate male coupling (14) and gasket (15) from tee (24).
(6)
Remove gasket (16) from female coupling (22).
(7)
Remove eight nuts (17), lockwashers (18), flat washers (19) screws (20) and flat washers (21).
Change 1
4-68.5/(4-68.6 blank)
