TM 10-4610-243-13
4-25.1. TEE AND GATE VALVE ASSEMBLY (9133-Y1) REPAIR - cont.
(7)
Connect plug (16) to female coupling (23) with ring (15).
(8)
Position gasket (14) and gate valve (13) on tee (35).
NOTE
Use two additional flat washers (12 and 5) at the top two screw holes (four per gate
valve) to prevent the screws from coming in contact with the gate valve body and to
assure proper torque.
(9)
Install ten flat washers (12) and eight screws (11), flat washers (10), lockwashers (9) and nuts (8).
(10)
Position gasket (7) and male coupling (6) on gate valve (13).
(11)
Install ten flat washers (5) and eight screws (4), flat washers (3), lockwashers (2) and nuts (1).
(12)
Install tee and gate valve assembly in water system (para. 3-4a).
(13)
Startup water system (para. 2-12c) and check tee and gate valve assembly for leaks.
4-26. 350 GPM PUMP CONNECTION KIT MAINTENANCE.
The 350 gpm pump connection kit consists of the components listed below. Refer to the following paragraphs for
applicable maintenance procedures.
Procedure
Para.
Tee Assembly (9112-Y1) Repair................................................................................................................
4-27
Tee Assembly (9112-Y2) Repair................................................................................................................
4-28
Tee Assembly (9112-Y3) Repair................................................................................................................
4-29
Tee Assembly (9112-Y4) Repair................................................................................................................
4-30
Discharge Hose Repair .............................................................................................................................
4-14
Gate Valve Assembly (4-inch) Repair........................................................................................................
4-31
Water Meter Assembly Repair...................................................................................................................
4-32
Water Meter Assembly Repair (Model 800KWSDS) ..................................................................................
4-32.1
4-27. TEE ASSEMBLY (9112-Y1) REPAIR.
This task consists of:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
4-68.4
Change 1
