TM 10-8110-202-13 & P
b. Patch 2. Cut a patch from PS-693 patch material that is 1/2 inch larger than patch 1 in all
directions.
8. Apply the two patches over exterior of hole as follows:
a.
b.
c.
d.
Apply one coat of PT-659 cement to one side of patch 1 and allow to dry.
Position and center patch 1 over hole with the cement side down.
Roll and stitch patch 1 thoroughly using a roller and stitcher.
Apply one coat of PT-659 cement to top side of patch 1 and allow to dry.
e. Apply one coat of PT-659 cement to one side of patch 2 and allow to dry.
Change 1
5 - 3 1
