Fig. 1. S-Series Conventional Cab

Fig. 2. S-Series Cab Interior View (Typical)

TM-5-3820-256-24-5 Drilling System Well Rotary Truck Mounted Air Transportable 600 Feet Capacity Model LP-12 NSN 3820-01-246-4276 Manual
Page Navigation
513

SERVICE MANUAL Fig. 1. S-Series Conventional Cab GENERAL The S-Series mid-range conventional cab shown here in Figure 1 and covered in this manual is available in either 200 or 230 cm width (80 or 90 inch) and for three different bumper to back of cab (B. B. C.) dimensions. This manual has been prepared to help servicemen maintain cab in its original condition or restore cabs which may have sustained damage. CONTROLS - INSTRUMENT PANEL While there is a wide range of optional equipment available on the S-Series models for which this cab is used, all instruments, gauges and driver controls are located for driver convenience. Fig. 2 shows the cab interior and a typical instrument panel installation. Removable panels provide for easy access to speedometer, cables, gauges, bulbs, wiring, plumbing, switches, valves, etc. CAUTION Always disconnect battery ground before servicing or removing instrument panel. For further information on S-Series instrument panel see INSTRUMENTS. CTS-4065 PRINTED IN UNITED STATES OF AMERICA Page 3

Privacy Statement
Press Release
Contact