TM 5-3825-226-24
12.
Remove washers (25) and (26) from armature
(21).
13.
Remove three screws (27), lockwashers (28),
and plate assembly (29) from frame assembly
(4).
14.
Remove two washers (30) from terminal stud.
15.
Remove seal (31) from frame assembly (4).
Remove insulator (32) from plate assembly
(29).
16.
Remove twelve screws (33), lockwashers (34),
plate (35), washers (36), insulator (37), plates
(38, 39, and 40) to free six brush holders (41).
17.
Remove six screws (42) and brushes (43) from
brush holders (41).
18.
Remove plunger assembly (19) from lever
housing (2).
19.
Remove retaining ring (43), retainer (44), spring
(45), retainer (46), boot (47), and washer (48)
from plunger assembly (19).
20.
Remove nut (49), lockwasher (50), terminal
(51), nut (52), three washers (53 and 54) from
armature housing (3).
21.
Remove twelve screws (55), pole shoes (56),
insulator bushing (57), coil assembly (58), three
insulators (59), and insulator (60) from armature
housing (3).
22.
Remove retaining ring (61) and shaft (62) from
lever housing (2).
23.
Remove lever assembly (63) and two seals (64)
from shaft (62).
3-42
