TM 5-3825-226-24
CRANKCASE GUARD
REMOVE AND INSTALL CRANKCASE GUARD
Tools Needed
A
5P3050
Jack Group
1
1.
Remove all but four of the bolts that hold
crankcase guard (1) in position. Loosen these
four bolts. Do not remove the four bolts.
2.
Put tool (A) in position and fasten it to
crankcase guard (1) as shown. Remove the
four bolts that hold the crankcase guard and
lower it from the machine with tool (A). The
weight of the crankcase guard is 200 lb. (90
kg).
3.
Put crankcase guard (1) in position on the
machine with tool (A).
4.
Install bolts (2). Remove tool (A) and tighten
the bolts.
3-39
