TM 5-3825-226-24
WHEEL BRAKE DISCS, WHEEL SPINDLES
REMOVE WHEEL BRAKE DISCS
start by:
a) remove wheel assemblies, bearings and seals
1.
Remove bolts (1).
2.
Remove disc (2).
INSTALL WHEEL BRAKE DISCS
1.
Put disc (1) in position on the wheel assembly.
2.
Install the bolts that hold the disc to the wheel
assembly and tighten them to a torque of 195 +
20 lb.ft. (265 + 25 N.m).
end by:
a) install wheel assemblies, bearings and seals
REMOVE WHEEL SPINDLES
start by:
a) remove wheel assemblies, bearings and seals
1.
Remove the bolts that hold spindle (1) to the
axle housing. Remove spindle (1). Weight of
the spindle is 40 lb. (18 kg).
2.
Remove the O-ring seal from spindle (1).
INSTALL WHEEL SPINDLES
1.
Put the O-ring seal on spindle (2).
2.
Put spindle (2) in position on the axle housing
with the oil hole (1) in the vertical position.
Install the bolts that hold the spindle on the axle
housing. Tighten the bolts to a torque of 225 +
25 lb.ft. (300 + 35 N.m).
end by:
a) install wheel assemblies, bearings and seals
3-156
