TM 5-3825-226-24
TORQUE CONVERTER
REMOVE TORQUE CONVERTER
start by:
a) remove elevator hydraulic pump.*
b) remove steering and water distributor hydraulic pump.*
1.
Remove panel assembly (1).
2.
Remove six bolts (2) from the two exhaust pipe
assembly flanges.
3.
Loosen bolt (5) in the clamp.
4.
Remove bolt (4) and remove exhaust pipe
assembly (3).
5.
Remove bolts (9) and disconnect upper drive
shaft (8) from the torque converter.
6.
Loosen
clamps
(7)
and
disconnect
tube
assembly (6) from the tube.
7.
Disconnect hose assemblies (10) and (12) from
the torque converter.
8.
Disconnect hose assembly (11) from the
transmission pump.
*This
operation
is
in
the
VEHICLE
SYSTEMS
DISASSEMBLY AND ASSEMBLY.
3-157
