TM 5-3825-226-24
TORQUE CONVERTER
6.
Connect hose assemblies (2) and (3) and install
temperature sending unit (4) to the torque
converter.
7.
Connect hose assemblies (5), (6) and (7) to the
torque converter.
8.
Install the hood panel assembly.
9.
Connect tube assembly (9) to the transmission
oil pump supply with hose (8) and tighten the
clamps.
10.
Put exhaust pipe assembly (10) in position and
install the bolt, washer and nut through strip (11)
to hold pipe assembly (10) in position.
11.
Install the bolts that hold pipe assembly (10) to
the exhaust manifolds.
12.
Tighten bolt (12) in the clamp.
end by:
a) install steering and water distributor hydraulic pump.
b) install elevator hydraulic pump.
* This operation is in the VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY.
3-159
