TM 5-3825-226-24
TRANSMISSION AND TRANFER GEARS
10. Remove transmission oil filter base (I 1).
11. Disconnect drive shaft (12) from the input transfer
gears.
12. Disconnect the air line from brake chamber
assembly (13).
13. Release the parking brake with shop air pressure of
70 psi (4.9 kg/cm2) or (480 kPa). Remove the
cotter pin and pin (14).
14. Remove brake chamber assembly (13) from the
bracket.
15. Install two 5/8"-11 NC forged eyebolts in the
transfer gear cases. Fasten a hoist to the
transmission and transfer gears. Remove the six
bolts
that hold the transmission and transfer
gears to the tractor. Remove the transmission and
transfer gears. Weight of the transmission and
transfer gears is 1250 lb. (563 kg).
3-186
