TM 5-3825-226-24
INPUT TRANSFER GEARS
7.
Use tooling (A) and remove the inner and outer
bearing cups from cage (4).
8.
Remove the ring that holds the bearing cups apart
from cage (4).
9.
Remove the O-ring seal from cage (4).
10.
Remove bolts (11). Install two 3/8” - 16 NC
forcing screws and remove manifold (10).
11.
Remove the small O-ring seal from cage
assembly (14).
12.
Use tool (B) and remove nut (12) and lock (13).
CAUTION: When the cage assembly and bearing cone
are removed, gear (15) is free to fall from case
assembly. Use a wooden block to hold gear in position
to prevent damage.
13.
Install two 3/8” - NC forcing screws and remove
cage assembly (14) and bearing cone as a unit
from case assembly (17).
14.
Remove the O-ring seals from case assembly
(17).
15.
Remove O-ring seal (16) from case assembly
(14).
16.
Remove gear (15) from case assembly (17).
17.
Remove the spacer from gear (15).
3-191
