TM 5-3825-226-24
TRANSMISSION
DISASSEMBLE TRANSMISSION
Tools Needed
A
B
C
8B7548
Puller Assembly
1
8H684
Ratchet Box Wrench
1
8H663
Bearing Puller Attachment
1
1P488
Drive Plate
1
FT833
Clamp
2
1P525
Drive Plate
1
Start by:
a)
separation of input transfer gears from
transmission
1.
Remove sleeves (1) from the manifold.
2.
Remove cover (2).
3.
Remove three bolts from pressure control valve
(4) and install three 5/16” - 18 NC guide pins (3)
approximately 7 in. (17.8 cm) long as shown.
4.
Remove the bolts and remove pressure control
valve (4).
5.
Remove plate (5).
6.
Remove the bolts from lever assemblies (8) and
slide shafts (6) and (7) out of the lever
assemblies.
7.
Remove lever assemblies (8).
3-195
