TM 5-3825-226-24
TRANSMISSION
25.
Remove bolts (29) and (30) that hold case (28)
in position.
26.
Install two 3/8"-16 NC forged eyebolts in case
(28). Fasten a hoist to case (28) and remove
the case. Weight of the case is 135 lb. (61 kg).
27.
Remove springs (33) and bolts (31).
28.
Remove plate (32) and the carrier assembly as
a unit.
29.
Remove the ring that holds carrier assembly
(36) and plate (32) together.
30.
Remove plate (32) from the carrier assembly.
31.
Remove ring (34) and bearing (35) from plate
(32).
32.
Remove the seal ring from sleeve (37).
33.
Remove seal ring (38) from carrier assembly
(36).
34.
Push the pins into shafts (40) with a punch and
hammer.
35.
Remove shafts (40), gears (39) and the washers
from carrier assembly (36). There is a washer
on each side of the gears. Remove the
bearings from the gears. Remove the pins from
the shafts.
36.
Remove the dowel and sleeve (37) from carrier
assembly (36) if a replacement is necessary.
3-198
