TM 5-3825-226-24
TRANSMISSION
37.
Remove shaft assembly (42).
38.
Remove pin (44) and seal rings (43) from the
shaft assembly.
39.
Remove the seal ring from coupling (41).
40.
Remove the ring that holds coupling (41) in
position and remove coupling (41) from shaft
assembly (42).
41.
Remove gear (45), disc assemblies (46) and
plates (47) from the No. 2 clutch housing.
42.
Remove No. 2 clutch housing (49) and remove
piston (48) from the housing.
43.
Remove the seal rings from piston (48).
44.
Remove pins (51) and springs (53) from the No.
3 and 4 clutch housing.
45.
Push pins (50) into the carrier assembly with a
punch and hammer.
46.
Pull the ends of the ring that hold gear (52) in
position, together and remove gear (52).
47.
Remove disc assemblies (54) and plates (56)
from No. 3 and 4 clutch housing (55).
48.
Remove gear (57) from clutch housing (55).
3-199
