TM 5-3825-226-24
TRANSMISSION
8.
Remove guide pins (3) and remove selector valve
(9).
NOTE:
See
DISASSEMBLE
TRANSMISSION
HYDRAULIC CONTROL VALVES to disassemble the
pressure control and selector valves.
9.
Remove ring (13) from sleeve (12).
10.
Push sleeve (12) down and out of manifold (10).
11.
Remove bolts (11) and remove manifold (10).
12.
Remove sleeve (12).
13.
Remove the ring that holds No. 1 clutch assembly
(15) in position from shaft assembly (14).
14.
Install two 3/8” - 16 NC forged eyebolts in No. 1
clutch assembly (15).
15.
Fasten a hoist and remove clutch assembly (15).
Weight of the clutch assembly is 60 lb. (27 kg).
16.
Remove the eyebolts from the clutch assembly
and remove coupling (16) from piston (17).
17.
Remove bearing race and roller assembly 918)
from the inside of coupling (16) with tooling (A).
3-196
