TM 5-3825-226-24
INPUT TRANSFER GEARS
4.
Install the O-ring seals in the case assembly and
cage assembly (3).
5.
Install cage assembly (3) in the case assembly.
6.
Put gear (1) in position in the case assembly. Use
a wood block to hold the gear in position.
7.
Install spacer (4) on gear (1).
8.
heat the outer bearing cone in oil to a maximum
temperature of 275°F (135°C). Install the bearing
cone on gear (1).
9.
Install the lock and nut on gear (1). Use tool (A)
and tighten the nut to a torque of 150 ± 10 lb. ft.
(205 ± 14 N·m). Bend the lock on the nut.
10.
Install manifold (5) on cage assembly (3).
11.
Heat inner bearing cone (7) in oil to a maximum
temperature of 275°F (135°C). Install inner
bearing cone (7) on input gear (6).
3-195
